4.
To adjust flame height, depress Burner
Control Knob, turn to the flame height
desired, then release�
The larger flame icon is the
HIGH position�
The smaller icon is the “Low”
setting position�
5.
To change between functions, push
in the knob, turn to selection, then
release�
TO TURN BURNERS ON
Note:
Unit must be off for 5 min� before starting�
1.
Depress the Gas Control
Knob, turn it to the
PILOT position, and
continue to hold down
while depressing & holding
down the red IGNITION
button�
2.
Keep red IGNITION button
depressed until visually
confirming the pilot has lit,
then release� The pilot is
visible looking through the
Pilot View Port�
3.
After the pilot is lit, keep the
Gas Control Knob depressed
for about 1 minute so that
pilot remains lit when knob
released�
TO TURN BROILER OFF
Push in Gas Control Knob
and turn to OFF position
and release�
TO ADJUST BROILER FLAME HEIGHT
10
Robata Grill 900 Models
Installation and Operation Manual
An ongoing program of product improvement may require us to change
specifications without notice.
WS-LGROBG-900, Rev December 2014.
Doc no: M0107.01
or visit
woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
LIGHTING INSTRUCTIONS
LIGHTING INSTRUCTIONS
Note:
Unit must be off for 5 minutes
before starting or restarting�
Shown:
Left side
Right side is
mirror image of
left side
Ignition
Button
Pilot
View
Port
Gas
Control
Knob
