OPERATION
Cross Transfer Deck Components
2
2-1
MHdoc070512
SECTION 2 OPERATION
2.1
Cross Transfer Deck Components
WARNING!
Always stay a safe distance from moving
equipment and boards while operating the transfer deck.
Failure to do so may result in serious injury or death.
The major components of the Cross Transfer Deck are identified below.
2.2
Transfer Deck Setup
IMPORTANT!
Before starting to use the transfer deck you
have to meet the following conditions.
Set up the deck on firm and level ground. Fasten the unit to the ground.
The transfer deck can be operated in temperature range from -20
o
C to 40
o
C
only.
The operator’s position is shown in the figure below.
FIG. 2-1 CROSS TRANSFER DECK
Chain Drive
Motor w/Gear
Box
Chain
Table
Electric Box
Receptacle for
Slabs
!