SLAB-MIZER AUTO FEED INSTALLATION
Publication 2/17/21
6 of 18
Form 2452
5.
Drill two holes in control box right side as shown in FIG. 6.
Mount light
1.
Remove mounting nut from light.
2.
Place wires and light base through hole in top of the control
box.
3.
Replace mounting nut.
NOTE:
The light uses only the green, yellow,
red, and orange wires.
FIG. 6
Use tape to secure
template to the
control box door
Fold or cut the tem-
plate to match the
door edge to the
template line.
Aligns to the box,
not the door
!
FIG. 7
