Wood-mizer SHR-T Series, Руководство пользователя

Страница: 53 / 110

Saw Head Adjustment
MHdoc051512 4-9
4
4.4 Saw Head Adjustment
See Figure 4-9. The saw head should be set perpendicular to the vertical mast. Using the
two sets of adjustment screws in the mast slide pads, you can adjust the saw head in
relation to the mast. To raise or lower the outside of the saw head, loosen the locking nuts
on either of the sets of screws. Then turn the adjustment nuts clockwise to raise the
ouside of the saw head or counterclockwise to lower the outside of the saw head.
NOTE:
Be sure to adjust the nuts evenly so the slide pad is parallel to the mast tube. If further
adjustment is needed and one set of the nuts has been fully adjusted, use the other.
FIG. 4-9
rs_024
Turn adjustment
nuts clockwise
to raise outside
of saw head
Turn adjustment nuts
counterclockwise
to lower outside
of saw head