Wood-mizer SHR-T Series, Руководство пользователя

Страница: 27 / 110

Obs³uga maszyny
Machine Start
Obs³uga maszyny MHdoc051512 2-8
2
to do so may result in serious injury. Be sure the blade
housing cover is in place and secured.
NOTE: After aligning the blade on the wheels, always check the blade guide spacing and
location.
2.6 Machine Start
DANGER! Before starting the resaw, perform these steps
to avoid injury and/or damage to the equipment:
„
Close the blade housing cover and replace any guards removed for service.
„
Check the feed track and remove all loose objects such as tools, wood, etc.
„
Check that the blade is properly tensioned.
„
Make sure all persons are a safe distance from the machine.
„
Check that the emergency stops are released.
NOTE: The resaw will not start if either of the emergency
stops is on.
Before starting the saw head, check that the main power switch servicing the resaw is on.
See Figure 2-5. Start the blade motor. To do this, turn the key switch to the position
and then push the Blade Start button on the control panel (see the figure below). The
motor should start and the blade should start spinning.
FIG. 2-5
EMERGENCY
STOP
“0”
I
II
START
STOP
STOP