Wood-mizer MP360 E16S, Руководство пользователя

Страница: 31 / 68

SETUP & OPERATION
Lower cutter
EGdoc071420 3-10
3
3.4.2 Lower cutter
DANGER! Before you open the safety covers of the planer, ensure that
the power is switched off and that the cutters are not rotating.
WARNING! Use protective gloves, particularly when you need to
loosen screws that are tightly fastened, or when you are tightening
screws (see safety instructions).
WARNING! Always wear gloves and eye protection when
mounting/dismounting the knives. The knives are very sharp. You can
hurt yourself even when you touch the knife lightly.
The lower cutter is fixed to the planer table from the infeed side. Two planning knives are mounted in
two of four cutter's slots upon delivery (planer knife 410 mm (16") HSS). Another two planning
knives, can be mounted in the two empty slots.
SETTING THE CUT OF THE LOWER CUTTER
Planning thickness of the lower cutter is set by adjusting the position of the infeed table using a lever
“A” (see below). Position of the inffed table is locked using locking handle “B”. Actual planning
thickness can be read from the scale “C”. Typical planning thickness of the lower cutter is 2 mm
(8/100").
See figure 3-12.
FIG. 3-12
A
B
C