Safety
Planer/thicknesser operation
Safety
EGdoc072921
2-6
2
Use proper maintenance procedures
DANGER!
Make sure all electrical installation, service and/or
maintenance work is performed by a qualified electrician and is in
accordance with applicable electrical codes.
DANGER!
Hazardous voltage inside the electric boxes and at the
motor can cause shock, burns, or death. Disconnect and lock out
power supply before servicing! Keep all electrical component covers
closed and securely fastened during mill operation.
WARNING!
Consider all electrical circuits energized and dangerous.
WARNING!
Never assume or take the word of another person that the
power is off; check it out and lock it out.
WARNING!
Do not wear rings, watches, or other jewelry while working
around an open electrical circuit.
IMPORTANT!
Planer/thicknesser is equipped with emergency switch.
It is used to immediately stop the motor in case of emergency.
Emergency switch should be always in good condition.
IMPORTANT!
Planer/thicknesser should not be modified by owner.
Use only original spare parts.
Keep safety labels in good condition.
IMPORTANT!
Always be sure that all safety decals are clean and
readable. Replace all damaged safety decals to prevent personal
injury or damage to the equipment. Contact your local distributor or
Wood-Mizer Customer Service to order more decals.
IMPORTANT!
If replacing a component which has a safety decal
affixed to it, make sure the new component also has the safety decal
affixed in the same place.
Fire protection
CAUTION!
The work-stand of the planer/thicknesser should be
equipped with a 4 kg or bigger dry powder extinguisher.
!
!