Sawmill Operation
Auto-Setting Feature
4
4-32
60HD-R10doc072619
Sawmill Operation
4.9
Auto-Setting Feature
Mode Selection
See Figure 4-1.
To select an Auto-Set mode, press the desired Mode Select button
(Auto-Down, Auto-Up or Pattern) located on the right side of the display. The Manual
Mode is the default mode when no other mode is selected. The Manual Mode allows you
to use the up/down function of the sawmill as you normally would without any Auto-Set
features.
Auto-Up Mode
- This mode
references the current blade height
and allows you to choose
an increment to move the blade
up
. The system will automatically move the saw head up
and stop at the next increment when you press the right joystick trigger switch to initiate a
set. Auto-Up mode is primarily used to raise the saw head in large increments when pre-
paring to cut a new log or log that has been turned. This allows the operator to raise the
saw head without having to hold the joystick up, freeing the operator to perform other
functions while the saw head is being raised.
Auto-Down Mode
- This mode
references the current blade height
and allows you to
choose an increment to move the blade
down
. The control system will automatically move
the saw head down and stop at the next increment when you press the right joystick trig-
ger switch to initiate a set. You can store sixteen different increment levels.
FIG. 4-1
600419-9C
14.3
118
1542
0
n/min
ft/min
2
