Wood-mizer LT40L DH, Руководство по обслуживанию

Страница: 66 / 133

Setup & Operation
Preparing The Sawmill For Towing
2
2-33 doc041118 Setup & Operation
See Figure 2-18.
9. Use the hydraulic controls to raise the log turner and loader as high as they will go. Manually lift the
loader and hook the loader chains to the sawmill frame. Use the hydraulic loader lever to lower the
loader until the chains are tight. Push the loader lever down to bring the loader feet up to the loader
arms.
10. In sawmills equipped with manual clutch engage the clutch/brake handle to tension the drive belt and
prevent motor vibration during mill transportation. When the transportation is completed, disengage
the clutch to avoid the drive belt deformation.
11. Hook the carriage safety chain located at the bottom of the carriage to the bracket at the bottom of
the mast.
See Figure 2-19.
CAUTION! Check to be sure the saw head safety chain is secured
before towing the sawmill. Failure to properly secure the saw head can
result in severe machine damage. Be sure the blade housing and
pulley covers are in place and secure. Use the safety retainer pin and
cable to fasten blade housing covers.
FIG. 2-18
FIG. 2-19
Loosen jam nut
and turn bolt
to raise or lower
stop bolt