Wood-mizer LT15 Series, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию, Страница: 27 / 118

Safety & General Information
Belt Sizes
Safety & General Information 15doc091818 1-15
1
1.6 Belt Sizes
See Table 1-2. Belt sizes for the LT15 sawmill are shown below.
1.7 Blade Sizes
See Table 1-3. Wood-Mizer TRU•SHARP™ offers three types of blades to provide efficient sawing
for all models of sawmills. The engine/motor size of your sawmill and the type of wood you saw
should determine which blade you choose for optimum performance.
See
The Blade Handbook
for blade hook angle, tooth height, and tooth set specifications.
Description Belt Size Wood-Mizer
Part #
Engine Drive Belt (G18, D10) BX87 097448
Blade Pulley Belts
B57
1
1
To insure proper blade tracking, use Goodyear, Dayco Super II,
or Browning belts only.
P04185
TABLE 1-2
Engine/Motor Size
Recommended Blade For Sawing
1
:
1
The LT15 sawmill is equipped with a blade having a length of 4.01 m.
Softwood Hardwood Frozen or Hard-to-Cut
Wood
5 hp - 15hp B275IH1030
B275IH741030 B375IH929
B375IH929
2
2
TRU•SHARP™ “F” blades use a 9/29 profile (9° hook angle and 29° back angle) and are
designed to cut frozen and/or extremely dense, hard-to-cut wood. Standard TRU•SHARP™
blades use a 10/30 profile.
16hp or more B376IH1030
B376IH741030 B275IH1030
B275IH741030
B376IH1030
B376IH741030
3
3
Customer may choose preferred blade.
B375IH929 2
Electric Motor B376IH1030
B376IH741030 B275IH1030
B275IH741030
B376IH1030
B376IH741030
3
B375IH929 2
TABLE 1-3