Wood-mizer EG400EH30S, Руководство пользователя

Страница: 47 / 133

Setup & Operation
Setup
Setup & Operation IE doc122719 3-1
3
SECTION 3 SETUP & OPERATION
3.1 Setup
IMPORTANT! When starting the machine for the first time,
check that main motor rotation direction is as indicated by
the arrow located on the motor body (fan guard). If the rota-
tion direction is incorrect, invert the phases. Setting the
phases correctly will ensure correct rotation directions of all
machine motors.
IMPORTANT! Before starting to use the edger the following
conditions have to be met:

Set up the edger on firm and level ground.

The edger can be operated with a sawdust extraction system only.

The edger can be operated indoor only.

The edger can be operated in temperature range from -15
o
C to 40
o
C only.

Illuminance at operator's position must be 300lx.
*

Have a qualified electrician install the power supply. The power supply must
meet the specifications given in the table below.
IMPORTANT! It is required that a 30mA Ground Fault Inter-
rupter (GFI) be used (type B).
* The light source can not cause stroboscopic effect.
3-Phase
Volts
Fused
Disconnect
Suggested Wire Size
400 VAC 80 A
10 mm
2
TABELA 3-1
!
!
!