Wood Bros 3200NT, Руководство по обслуживанию

Страница: 4 / 24

3200NT Timer
4
Timer Operation
Set Time of Day
When the timer is In Service , push either the Set Up or Set Down button once to adjust the Time of Day by
one digit. Push and hold to adjust by several digits.
Manually Initiating a Regeneration
1. When timer is In Service , press the Extra Cycle button for 5 seconds to force a manual regeneration.
2. The timer reaches Regeneration Cycle Step #1.
3. Press the Extra Cycle button once to advance valve to Regeneration Cycle Step #2 (if active).
4. Press the Extra Cycle button once to advance valve to Regeneration Cycle Step #3 (if active).
5. Press the Extra Cycle button once to advance valve to Regeneration Cycle Step #4 (if active).
6. Press the Extra Cycle button once to advance valve to Regeneration Cycle Step #5 (if active).
7. Press the Extra Cycle button once more to advance the valve back to In Service
Timer Operation During Regeneration
In the Regeneration Cycle step display, the timer shows the current regeneration step number the valve is
advancing to, or has reached, and the time remaining in that step. The step number that displays flashes until
the valve completes driving to this regeneration step position. Once all regeneration steps are complete the
timer returns to
In Service and resumes normal operation.
Example:
Start a Regeneration Tonight
With metered delayed timers, press the Extra Cycle button momentarily. The In Service indicator dot flashes
and starts a Regeneration tonight at the programmed Regeneration Time .
Day Regeneration Timer
During normal operation the Time of Day display is visible at all times. The timer operates normally until the
number of days since the last regeneration reaches the Regeneration Day Override setting. Once this occurs,
a regeneration cycle is initiated at the preset Regeneration Time .
Flow Meter Equipped Timer
During normal operation the Time of Day display alternates with the Volume Remaining display
(gallons or m
3
).
— As treated water is used, the Volume Remaining display counts down from the calculated system
capacity to zero or (----). When this occurs a Regeneration Cycle begins or delays to the set
Regeneration Time.
— Water flow through the valve is indicated by the Flow Dot that flashes in a direct relationship to flow rate.
Less than 10 Minutes Remaining in Regen Step #1
Press the Extra Cycle button during a Regeneration
Cycle to immediately advance the valve to the next cycle
step position and resume normal step timing.