11
MIN PTZ CAMERA
On Screen Display Menu
PTZ SETTING & INSTALLATION
STEP 4
STEP 5
STEP 6
Connect the camera with the provided Installation
cable. The arrow mark on the cable connector
should be facing upwards (see diagram).
After cable connection, close the cable latch.
STEP 4.
STEP 5.
STEP 6.
(CAUTION) For safety reasons, the power should be
off during the installation. There is NO power
button on the camera.
Connect the metal safety wire from the bracket to
the camera with the included screw.
Pull the cable into the ceiling hole and attach the
camera to the bracket by turning clockwise.
After mounting the camera to the bracket, fix the
camera with the supplied fixing screw.
10
MIN PTZ CAMERA
(NOTICE) To make cabling without ceiling hole(Side cabling),
please cut off the cabling guide of PTZ. (see picture)
1 Initialize
2 Motion Menu
When the device is powered on, you can check the address,
version, protocol and video setting values.
MOTION MENU
The preset function is that the camera memorizes positions
of the pan/tilt and zoom. This function is a representative
function of the speed dome which can find memorized
preset positions just by selecting the preset number.
MAIN MENU
MOTION
DOME
CAMERA
CLEAR
PTZ RESET
EXIT
< NEAR / RIGHT MOTION >
1) Set preset.
SAVE CLR BACK EXIT
PRESET MENU
PRESET NO
LABEL
POSIRION
FOCUS
: 001 UNDEFINE
: PRESET 001
: 019.9, 005.4
: AUTO
< NEAR / RIGHT PRESET NO >
- Set PRESET Number
PRESET SELECT 1
< SEL NEAR/MOVE JOYSTICK >
P 0 0 1
P 0 0 7
0 1 3
0 1 9
0 2 5
0 3 1
0 3 7
0 4 3
0 4 9
P 0 0 2
P 0 0 8
0 1 4
0 2 0
0 2 6
0 3 2
0 3 8
0 4 4
0 5 0
P 0 0 3
0 0 9
0 1 5
0 2 1
0 2 7
0 3 3
0 3 9
0 4 5
0 5 1
P 0 0 4
0 1 0
0 1 6
0 2 2
0 2 8
0 3 4
0 4 0
0 4 6
0 5 2
P 0 0 5
0 1 1
0 1 7
0 2 3
0 2 9
0 3 5
0 4 1
0 4 7
0 5 3
P 0 0 6
0 1 2
0 1 8
0 2 4
0 3 0
0 3 6
0 4 2
0 4 8
0 5 4
Preset No. : Max. 63 positions can be stored and the each
position can be assigned as a defined preset No.
Label : Each preset can have its own label name.
Position : It displays the coordinates to position the assigned
preset.
Focus : It enables to set the camera focus for each preset
position.
NEAR
NEAR
Press key.
Select number by using joystick and press key.
INITIALIZE
ADDRESS
VERSION
VIDEO
PROTOCOL
>>PAN OFFSET . . . . . . .
>>TILT OFFSET . . .
: 001 <TOP>
: 8.02
: NTSC EMC
: WPD 2400,N,1
NORMAL SETTING
