11
MIN PTZ CAMERA
PTZ SETTING & INSTALLATION
STEP 3
STEP 4
Connect the external cables to the camera (Video,
Power, RS-485 communication, Alarm-in, and Relay-out)
STEP 3.
STEP 4.
(CAUTION) For safety reasons, the power should be off
during the installation.
There is NO power button on the camera.
Attach the camera to the bracket by turning clockwise.
After mounting the camera to the bracket, fix the
camera with the supplied fixing screw (PH(TTB)3x10).
10
MIN PTZ CAMERA
(NOTICE) To make cabling without ceiling hole(Side cabling),
please cut off the cabling guide of PTZ. (see picture)
< In-ceiling Mount >
Dome
PTZ
In-ceiling
Mount deco-Ring
PTZ SETTING & INSTALLATION
STEP 1
STEP 2
Prepare the installation accessories provided in the
camera box. The Video and RS-485 control cables,
Power adaptor (over 1A) and installation tools are
necessary to complete the installation.
For cable connection, make a hole (Hole size 110mm)
in the ceiling where you want to install the camera.
Attach the installation bracket with the included
3 fixing screws(#8x38).
STEP 1.
STEP 2. The external cables (video cable, controller cable
and power) should be inserted into the center hole
of the bracket.
STEP 3
STEP 3. Connect the external cables to the camera
(Video, Power, RS-485 communication,
Alarm-in, and Relay-out)
STEP 4
STEP 4. Attach the camera to the bracket by turning clockwise.
After mounting the camera to the bracket, fix the
camera with the supplied fixing screw (M3x6 PH).
2) In-ceiling Mount
Before installation, assemble included In-ceiling mount Bubble
kit like below pictures and set the camera DIP switch setting.
(CAUTION) For safety reasons, the power should be off
during the installation. There is NO power button
on the camera.