8
Placing the dress coals – continued
Next, take both finger coals and place
one at each end of the front row of
coals as shown in figure 12, again
making sure that they bridge across
from the front coal to the matrix.
Now take six random shaped coals
and position as shown in figure 13.
This second row of coals should rest
on top of the first row, overlapping by
5-10mm. Again, ensure even spacing
to obtain the best flame effect.
NG MODELS ONLY: Next, take five
random shaped coals and arrange as
shown in figure 14. Again, these coals
should overlap the previous row by 5-
10mm. Once again ensure even
spacing.
LPG MODELS ONLY: Take three
random coals and position in the centre
of the matrix, spaced 10-15mm from
each other to make the third row.
Discard the two remaining random
coals.
Figure 12
LPG
MODELS:
NOT
REQUIRED
Figure 13
Figure 14
