18
1 2 .
I N S T A L L A T I O N C O M P L E T I O N
1. Fix the self-adhesive spillage test label inside the steel base panel next to
the data label.
2. Hang the front casting by the hooks at the four corners as shown in
figure 42.
3. Fit the top casting making sure that the corners locate as shown in
figure 43.
4. Fit the top infill casting. See figure 44.
5 If necessary the appliance can be levelled by the adjustment bolts at the
back of the side castings. See figure 45.
Figure 45
Figure 44
Figure 43
Figure 42
