WOLTURNUS Dalton Скачать руководство пользователя страница 47

Страница: 47 / 50

Wolturnus Active Wheelchair Manual 2019

Instructions for reuse

12 Environment

Wolturnus A/S strives to respect the environment to the greatest degree possible. An assess

ment has been done to determine the A-Run

wheelchair’s effect on the environment during its

life cycle. During development, materials and forms are chosen that minimise waste of energy

and material during production.

Wolturnus A/S has a unique approach to individual user measurement and to subsequent tailo

ring of the chair to meet the user’s needs. Combined with the wheelchair’s high mechanical

quality, this ensures that the user can use the wheelchair for many years. The

A-Run wheelchair

lifetime is calculated to be approximately five years if it is maintained according to the instruc

tions in this user manual. The long lifetime limits its effect on the environment.

Furthermore, meticulous quality control throughout the production process ensures that

faults are rare, which limits the need to use superfluous resources on repairs or replacement

products.

Generally, all work at Wolturnus A/S is carried out with respect for the environment. Alumi

nium residue after the production process is collected in containers and delivered for recycling.

During the mounting process, use of hazardous agents is kept to a minimum and the work pro

cesses meet occupational safety requirements (APV). Use of material is continually optimized

to ensure minimum waste.

A-Run

Содержание Dalton



















































Результаты поиска

Содержание Dalton

Отзывы:

Похожие инструкции для Dalton

Бренды по названию

Популярные бренды

WOLTURNUS Dalton, Руководство пользователя

Результаты поиска

Содержание Dalton

Отзывы:

Похожие инструкции для Dalton

Бренды по названию

Популярные бренды