48. The black wire extending from the side wall of the black flexible tubing will be connected to the
inline fuse’s other wire that has a female bullet terminal. Cut the black wire to proper length and
crimp the male bullet terminal provided. Test crimp connection by holding the wire while lightly
pulling on terminal to make sure it is securely crimped to the wire. See Fig. 28E.
49. Connect the male bullet terminal to the fuse holder’s female terminal. See Fig. 28E.
50. Reconnect the (-) ground clamp onto the battery and tighten firmly.
51. Secure wiring with the plastic ties provided.
WARNING: It is important to inspect all electrical system wires that may have changed position
during installation to ensure that they are not interfering with operational parts and controls.
Installation is complete.
To test, put the ignition switch to on (if your motorcycle requires such) to sound the horn. Press the
factory horn button switch and the Hideaway Blast horn will sound.
52. Secure the seat back onto the motorcycle.
We hope that find the Wolo’s new Hideaway Blast to be a valuable addition to your motorcycle, while
keeping you safe. Your opinion of the horn and being happy with your purchase is very important to
Wolo. We ask that you send your comments or questions to [email protected]. All emails will
be answered.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED
TO A TERM OF THREE (3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR
ANY OTHER PERSON FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH
OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase.
Provide with the return a brief description of the problem. Also, include with the return a check or money order in the amount
of $20.00 to cover return shipping. Mail to:
Wolo Manufacturing Corp.
One Saxwood Street, Deer Park, NY 11729
Attn: Warranty Service
E-mail: [email protected]
Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the
date of purchase, that this product is free from defects in workmanship and materials. If there is such a
proven defect, Wolo, at its option, will either repair or replace the item free of charge, if it is returned to Wolo
within three months from the date of purchase together with proof of purchase as described below. Wolo
reserves the right to inspect any defect prior to settling any warranty claim by repair or replacement. This
warranty is limited as above provided and Wolo will not be responsible for fire or other casualty or accident,
due to neglect, abuse, abnormal use, modifications, faulty installation of this product, or natural causes.
© 2020 Wolo Mfg. Corp. All Rights Reserved.
HARLEY-DAVIDSON
®
motorcycles and HARLEY
®
are registered trademarks of H-D U.S.A., LLC.
Wolo and its products are not affiliated with or otherwise approved by H-D U.S.A., LLC.
3M
TM
Dual-Lock
TM
tape is a trademark of 3M.
The Hideaway Blast
TM
system and/or components are protected by one or more of the following: US D860,850,
CH ZL201830109057.4, ECD 004751436-0001, US D850,887, ECD 004753234-0001, CH ZL20183010955.5,
CH ZL201830674542.6, and other U.S. and international patents pending.
