88
1.
Remove the contents from the freezing-compartment and put them into a
cooling box.
2.
Switch off the appliance by turning the thermostat to position 0 / AUS / OFF
and disconnect it from the mains or use a cut-off device.
3.
When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4.
Do not use hot water to accelerate the defrosting operation.
5.
Remove the big pieces of ice first.
6.
Afterwards remove the small pieces of ice.
7.
Wipe and dry the appliance and door seals with dry and soft cloths.
8.
After cleaning leave the door open for some time to ventilate the appliance.
5.2 Replacing of the illuminant
WARNING!
The LED-illuminant must be replaced by a competent
person
only
. If the LED-illuminant is damaged, please contact a qualified
professional (
not covered by the guarantee
).
6. Trouble shooting
MALFUNCTION
POSSIBLE CAUSE
MEASURE
T
HE APPLIANCE DOES NOT WORK AT ALL
.
1.
The plug of the appliance is not
connected to the socket.
1.
Connect the appliance to the mains
properly.
2.
The plug has become loose.
2.
Check the plug.
3.
The socket is not supplied with
energy.
3.
Check the corresponding socket by
connecting it with another appliance.
4.
The fuse is switched off.
4.
Check the fuse box.
5.
The voltage is too low.
5.
Compare the data on the model
plate with the data of your energy
supplier.
T
HE COMPRESSOR DOES NOT WORK AT ALL
.
1.
Incorrect energy supply.
1.
Check the energy supply.
T
HE COMPRESSOR OPERATES FOR TOO LONG
.
1.
The appliance has been switched off 1.
The appliance needs some time to
