Connectors
(#8)
:
1 Camera head
2 Light
3 IR-receiver
4 Camera keys, zoom wheel (
see page 3
)
5
6
7
8
9 Light field for slides
10 Preview monitor
11
12 Pad to rotate the VZ-9 (
see page 7
)
13 IR-remote control
Close up lens for camera
Pull pad to lift the arm up/down
Power and light on/off key (
see page 3
)
Connectors
(on the back as shown below)
Working surface
Setting up
Power-on preset:
The power-on preset is automatically activated when switching on the unit.
The settings are: Zoom size approx. 20 x 15 cm (A5), Autofocus on, Autoiris on.
14
Serial control
input RS232
(see page 12)
15
External input
for computers
(see page 8)
16
PAL/NTSC Y/C
(S-Video) output
(see page 6)
17
DVI
output
(see page 5 and 12)
18
RGB
output
(see page 5)
19
20
21
22
USB-port
(see page 12)
LAN-port
(see page 12)
Power connection
12V
DC
-output for lightbox
(see page 7)
1. Connect the power pack to the power-input
(#21).
2. Connect your display device (projector, monitor, video
conferencing unit etc.) to the appropriate output of the
Visualizer
(#16, #17, #18, #19 or #20).
IMPORTANT:
For choosing the right output please read the detailed
description on page 5!
3. Pull the arm upwards using the pull pad
(#6).
Camera head and light automatically move into the
working position. The VZ-9 is switched on
automatically.
ENGLISH
1
1
4
2
2
8
9
10
12
6
5
7
11
13
3
3
12
2
7
POWER LB
S-VIDEO
EXTERN IN
USB
RS 232
DVI
LAN
15
18
16
19
21 22
17
20
14
RGB
