background image

SWITCHABLE OUTPUTS

IMAGE

off

on

The Composite video output (#32) and the Y/C output (#37) of the Visualizer are switchable. Use the IMAGE 
keys (#21,#22) on the control panel or the remote control to switch the signal supplied from these outputs on 
and off.

Independently a video signal is always supplied to the Preview video output (#31). This output can be used for 
a control monitor. A constant sync signal is supplied to all switchable outputs (even in the image off mode) 
eliminating monitor image distortions when switching.

READ-IN DEVICE FOR COMPUTERS

The Wolfvision Visualizer is perfectly suited for working as 
a 3-D scanner for computers equipped with a Grabber Card. 
A Grabber Card can be used to digitize a video signal, in order
to store and process single pictures on a computer.
 
Therefore just connect the Composite video output 
(#32) or the Y/C output (#37) of the Visualizer to the 
according input of your computers Grabber Card.

CONNECTING A NUMBER OF MONITORS

o

u

t

in

in

in

in

o

u

t

o

u

t

o

u

t

Connect a control monitor to the Preview video output 

(#31)

 of the Wolfvision Visualizer. Connect 

additional monitors to the Composite video output

 (#32) 

or the Y/C output 

(#37)

 of the Visualizer by 

looping them through the inputs and outputs of each monitor (as shown above). 

In this way a number of monitors can be connected. However if the signal is looped through a lot of monitors 
a video signal amplifier should be used in order to achieve equivalent picture quality on all monitors. The
number of monitors throught which the signal can be looped without a signal amplifier depends on the
type of monitor and on the cable lenght.

8

OPTIONAL LIGHTBOXES (Bottom light)

Switch off the light of the Visualizer with the Light off key (#23) and switch on the light of the lightbox.

Optional lightboxes are available from Wolfvision in 3 different sizes.
These lightboxes improve the quality of transparencies, X-rays and slides.

While working with one of Wolfvisions optional 
lightboxes,  the light of the Visualizer has to be 
switched off - in order to prevent reflections !!!

Содержание Visualizer VZ-15

















Отзывы: