8x8 HDMI2.0 Matrix with Audio Matrix
36
10. Firmware Upgrade
Please follow the steps as below to upgrade firmware by the
FIRMWARE
port on the
rear panel:
1)
Prepare the latest upgrade file and rename it as “08010000.APP” on PC.
2)
Power off the switcher, and connect the
FIRMWARE
port of switcher to the PC with
USB cable.
3)
Power on the switcher, and then the PC will automatically detect a U-disk named of
“BOOTDISK”.
4)
Double-click the U-disk, a file named of “READY.TXT” would be showed.
5)
Directly copy the latest upgrade file 08010000.APP (.bin) to the “BOOTDISK” U-disk.
6)
Reopen the U-disk to check the filename “READY.TXT” whether automatically
becomes “SUCCESS.TXT”, if yes, the firmware was updated successfully, otherwise,
the firmware updating is fail, the name of upgrade file (.bin) should be confirm again,
and then follow the above steps to update again.
7)
Remove the USB cable after firmware upgrade.
8)
After firmware upgrade, the switcher should be restored to factory default by sending
command.
11. Panel Drawing
ALL
1
2
3
4
1
2
3
4
5
6
7
8
INPUTS
OUTPUTS
CLEAR
ENTER
HOLD TO STORE
PRESET RECALL
IR
DC 24V
FW
TCP/IP
1
2
3
6
7
8
1
4
2
3
5
6
7
8
4
5
1
2
3
4
5
6
7
8
DOWN-SCALING
Tx
Rx
R S232
IR IN
L
L
L
L
L
L
L
L
R
R
R
R
R
R
R
R
SPDIF
SPDIF
SPDIF
SPDIF
SPDIF
SPDIF
SPDIF
SPDIF
AUDIO MATRIX OUTPUTS
INPUTS
OUTPUTS
436.4 mm
4
4
.0
m
m
436.4 mm
