WolfPack HDTVMT0808VF2 Скачать руководство пользователя страница 4

 

 

4

 

Introduction 

The 

HDTVMT0808VL2

 HDBaseT 8×8 Matrix for HDMI routes eight Hi-Def sources to any 

eight HDTV displays, supporting 1080p Full HD up to 4K plus all 3D formats, along with 
multichannel digital audio formats such as Dolby® True HD and DTS-HD® Master Audio™. 
Based on HDBaseT chipset inside, the output distance can reach up to 70m over Cat5e/
Cat6. Each source can be routed to any display using the front-panel push buttons, IR remote 
control, RS-232 interface, or via TCP/IP. 

Features: 

Supports resolutions up to 1080p@60HZ,48-bit deep color, 4k@30HZ

HDBaseT chipset inside for the output distance up to 70m in 1080p, and 40m in 4K.

Matrix can power the remote receiver, POH, no power supply needed for remote
receivers.

Allows any source to be displayed on multiple displays at the same time

Allows any HDMI display to view any HDMI source at any time

Dolby TrueHD and DTS-HD master audio pass through HDMI output

Advanced EDID management for rapid integration of sources and displays

Front-panel LCD display for status feedback

Multiple switching mode, push-in button, IR remote control, RS-232 control, and TCP/IP
control

Easy installation with rack-mounting ears

Full 3D pass- through.

HDCP 

compliant

Содержание HDTVMT0808VF2























Отзывы: