WolfPack HDTVMT0808VF2 Скачать руководство пользователя страница 20

 

 

20

 

Maintenance 

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this 
unit. 

Warranty Policy 

HDTV Supply

 products are warranted against defects in material and workmanship for two years from the date of 

shipment. During the warranty period, 

HDTV Supply

 will, at its option, repair or replace products that prove to be 

defective. Repairs are warranted for the remainder of the original warranty or a 90 day extended warranty, whichever 
is longer. 
For equipment under warranty, the owner is responsible for freight to 

HDTV Supply

 and all related customs, taxes, 

tariffs, insurance, etc. 

HDTV Supply

 is responsible for the freight charges only for return of the equipment from the 

factory to the owner. 

HDTV Supply

 will return the equipment by the same method (i.e., Air, Express, Surface) as the 

equipment was sent to 

HDTV Supply

.  

All equipment returned for warranty repair must have a valid RMA number issued prior to return and be marked 
clearly on the return packaging. 

HDTV Supply

 strongly recommends all equipment be returned in its original 

packaging.    
Tonlyware

s obligations under this warranty are limited to repair or replacement of failed parts, and the return 

shipment to the buyer of the repaired or replaced parts. 

Limitations of Warranty 

The warranty does not apply to any part of a product that has been installed, altered, repaired, or misused in any way 
that, in the opinion of 

HDTV Supply

, would affect the reliability or detracts from the performance of any part of the 

product, or is damaged as the result of use in a way or with equipment that had not been previously approved by 

HDTV Supply

.  

The warranty does not apply to any product or parts thereof where the serial number or the serial number of any of its 
parts has been altered, defaced, or removed.  
The warranty does not cover damage or loss incurred in transportation of the product.  
The warranty does not cover replacement or repair necessitated by loss or damage from any cause beyond the 
control of 

HDTV Supply

, such as lightning or other natural and weather related events or wartime environments.  

The warranty does not cover any labor involved in the removal and or reinstallation of warranted equipment or parts 
on site, or any labor required to diagnose the necessity for repair or replacement.  
The warranty excludes any responsibility by 

HDTV Supply

 for incidental or consequential damages arising from the 

use of the equipment or products, or for any inability to use them either separate from or in combination with any 
other equipment or products.  
A fixed charge established for each product will be imposed for all equipment returned for warranty repair where 

HDTV Supply

 cannot identify the cause of the reported failure. 

Содержание HDTVMT0808VF2























Отзывы: