2
Fig.a
1. Remove the Flappy strap keepers as they will not be used at all.
2. Insert raw end of the Seat Strap Webbing into the slot on the patch welded to the bag, on the underside
of the buckles.
Fig.b Small Rolie
Fig.c Medium Rolie
4. The Medium Fig. c
5. Center webbing, the loop will stick out about 1/2" on each side.
6. Your bag is now
"Patch Threaded".
*************************************************************************************
1. Remove All straps from the Sloped Tank Pads.
2. Set up the Two Sloped Tank Mounts as Shown. Fig.2
Fig.2
Tank Straps
Frame Straps
3. Place the Mount on your tank, so it straddles the Gas Cap. Fig.3 & Fig.4
