2
1. To Start you will need to "Patch Thread" each bag.
"Patch Thread" Setting up The Small and Medium Rolie bag.
Tools Needed:
Long Screwdriver, Chop Stick, or long tool.
Your Small or Medium Rolie bag comes with two Seat Straps.
These will be
"Patch Threaded"
Fig.a
Fig.a
1. Remove the Flappy strap keepers as they will not be used at all.
2. Insert raw end of the Seat Strap Webbing into the slot on the patch welded to the bag, on the underside
of the buckles.
3. The Small Fig.b
Fig.b
Fig.c
4. The Medium Fig. c
5. Center webbing, the loop will stick out about 1/2" on each side.
6. Your bag is now
"Patch Threaded". Fig.a
*************************************************************************************
Installing the Rolie Saddle Bag Mount.
1. Place Saddle Bag Mount across the seat and rear fender of your bike. Center the top patch patch on the
bike. Fig.1
**Make sure the Saddle Bag Mount does not over hang the Side panel, Especially on Exhaust Side**
