2. Tighten the bag compression straps to secure the bags to the Bag Plates and to keep the contents from shifting.
!!! Always TUG upwards on the saddlebags to make sure they are securley fastened.!!!
Installation of the Wolfman Pikes Peak Rapid Release system in complete.
Once you have attached all plates review your work make sure all fastners are secure.
***Periodically Check All Fasteners and make sure they are snug and secure.***
**Disclaimer: It is the Users responsibility to make sure you have fastened the clasp securely after the bags have been
removed and reinstalled. Wolfman is in no way liable for not securely and properly fastened bags.**
For added security You may add a small lock (not included) to the clasp loop.
Thank You for Purchasing Wolfman.
Woof!e
**For GIVI side racks:
1. Remove all harware from side racks.
2. Per Side- You will use 3-Rack Mounts and Hardware and 1-M6X30, 1-M6 Washer and 1-M6 Nylok Nut.
3. Position Rack Plate so that the GIVI Top Tab with 2 holes is over one of the Upper Slots. Use the Single M6X30and M6
washer through the slot and hole with the M6 Nylok on the back side.
4. Attach the 3 remaining Rack Mounts as described in the above instructions.
