3
III. Attaching Rolie Bags.
**All Rolie Bags attach to the same 4-‐Aluminum Buckles on each leg of the B-‐Base. **
Remove All the Strap Keepers from the straps. A Great storage spot: clip them to the Bunji Cord so you don’t lose
them.
1. Start with the Top Front Aluminum Buckle B-‐Base. Fig.7
Aluminum Buckle-‐ 4 per leg
Fig.7
Fig.8
2. Place bag on the side of the mount, use you Hip to hold it in place while you thread the top webbing through the
Aluminum Buckle Slot, Through the Strap Keeper and back through the buckle on the bag. Fig.7
3. Thread the remainder of the webbing through the Aluminum buckles on the mount, through the strap keepers and
back to through the buckles on the bag. Fig.8
4. Attach the Wide strap across the outside of the Rolie Bag. On the 303 Rolies, that have the 2” D-‐Ring at the bottom
Remove the 2” Side release buckle, Thread the Long Bottom strap through the 2” D-‐Ring under the Bunji, re-‐thread the
2” side release buckle. Fig.9
5. Thread through the Handle Loop. Tighten snug and secure. Secure the excess web to the Strap Keepers. Fig.10
Fig.9
Fig.10
5. Repeat Steps 1-‐5 for the other side of the B-‐Base.
