Using the Countdown Timer
Once you have selected the appropriate temperature as indicated on page 9,
you can use the automatic timer to turn the Fryer off and sound a notification
when the cooking time is completed.
You cannot adjust the temperature while you are in timer countdown mode.
Once the COOKING indicator is blinking the Time / Temp button is disabled.
1
The countdown timer will not start until the oil is preheated. The display
must be blinking
READY
before setting the timer.
2
Press the Temp/Time button twice and the time will blink.
You cannot change
the time unless it is blinking.
3
While blinking, press +/– to adjust the timer, then press the on/off to begin
the timer.
4
The panel will display a blinking
COOKING
indicator and will remain in
Timer mode while the countdown timer is working.
5
You can adjust the countdown timer while cooking by pressing the +/– button.
6
Lower the food into the oil and place lid on top. At the end of the cooking
cycle you will hear five beeps and the Deep Fryer’s thermostat will turn off
and display the previously selected temperature. The Heating, Ready, and
Cooking indicators will not appear in the display indicating that the unit has
turned itself off.
Note: You must be in timer mode to use the timer function.
Operating the Control Panel
in Program Mode
Using the Program Function
Your Deep Fryer comes equipped with four pre-programmed settings for French
Fries, Chicken, Fish, & Shrimp. These settings are based upon frying no more
than the recommended volume of food, i.e. 3.0 lbs, and not to exceed the MAX
line on the frying basket.
1
Press the PROGRAM button to switch among the pre-set functions
2
The LCD will display the preset temperature value according to the
chosen figure.
3
Press ON/OFF to start preheating the oil. The HEATING indicator will blink on
the control panel display and the yellow heating light will illiminate during
the preheating cycle.
4
Your oil is preheated when the READY indicator displays and 5 beeps sound.
5
Lower your basket with food into the Fryer and press the on/off button
to start the Timer. The display will change to a countdown timer and the
control panel display will show a blinking COOKING. The yellow heating light
will cycle on and off during cooking to maintain the set temperature.
6
At the end of the cooking cycle you will hear five beeps and the Deep Fryer’s
thermostat will turn off and display the previously selected temperature.
7
Place the basket into the basket clip which will allow the excess oil to drain
from the food for a minute or two. Do not leave the cooked food in the basket
in the draining position for more than five minutes or it may lose its crispness
and become soft.
You can adjust the Time in PROGRAM mode during the cooking process to suit
your personal preference. While the COOKING indicator is blinking and the Time
is displayed, press +/– to adjust the time up or down. You cannot change the
Temperature once the COOKING indicator is blinking.
You can stop the frying process at any time by pressing on/off to cancel the
program and manually set the Time/Temp as outlined on Pages 9 and 10.
Note: Every time you switch on the Deep Fryer, the Programs will revert back to
the default setting. The following are the default settings for the Programs:
French Fries (crinkle cut)
350º F
12 minutes
Fish (batter dipped)
350º F
10 minutes
Boneless Chicken Breast (breaded)
350º F
12 minutes
Shrimp (batter dipped)
350º F
4 minutes
10
11
