Wolfen 9509093, Руководство по установке

Страница: 5 / 8

5
TM
Wall Bracket Installation
CLEANING
We recommend the use of soap water or approved cleaners. This product should not be cleaned
with abrasive materials. Refer to Stainless Steel Care & Maintenace document. Damage caused
by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.
INSTALLATION INSTRUCTIONS
Fixing screws not provided. The appropriate screw type should be selected for either a solid wall or
timber stud wall application.
If fixing to timber framed walls or partitioning the wall should be reinforced with a noggin in the
appropriate location to receive fixing screws.
1. Mark bracket fixing points to acheive desired height.
Note: Recommended overall height is 800mm from top of sink to finished floor (see diagram to the
left for fixing points)
2. Drill holes as marked and install first wall bracket with appropriate fixing screws
Note: Horizontal distance between fixing points is 485mm
3. Ensure that brackets have been installed parallel to each other and are level horizontally
4. Place Wolfen Hand Basin onto brackets
5. Install 40mm plug waste
6. Connect waste trap