8
|
Wolf Customer Care 800.222.7820
VACUUM SEAL DRAWER OPERATION
PUMP DEHUMIDIFICATION CYCLE
Moisture can build up in the vacuum pump oil, which could
damage the unit. Run a pump dehumidification cycle when
appears on the display.
To Remove Moisture from the Vacuum Pump:
1
Press
.
2
The pump cycles for approximately 10 minutes.
3
Once complete, the unit turns off.
4
Allow the unit to cool for 1 hour before starting another
cycle.
Operation
AUXILIARY ATTACHMENT
The auxiliary attachment provided can be used to vacuum
seal wine bottles and other rigid containers.
To Vacuum Seal Rigid Containers:
1
Place the unit adapter and wine bottle adapter onto
opposite ends of the vacuum hose.
2
Place the unit adapter over the vacuum inlet in the
vacuum chamber. Refer to the illustration below.
3
Place a bottle stopper in the wine bottle.
4
Place the bottle adapter over the stopper.
5
Press AUX VAC multiple times to select the desired
vacuum level. Use level 1 for all bottles and rigid con-
tainers unless otherwise specified for the container.
6
Press START to initiate the vacuum cycle.
7
An audible signal indicates the process is complete.
NOTE: When AUX VAC is pressed, the lights indicating the
VACUUM and SEAL level will turn off. To resume normal
operation, select a VACUUM setting.
VACUUM
INLET
Auxiliary attachment
