9
ALERT VOLUME
ALERT TONE
NIGHTLIGHT SETTINGS
In
‘Advanced Menu’
go
‘Alert
Volume’
to adjust the volume of
the bite Alarm alert.
In
‘Advanced Menu’
go
‘Alert
Tone’
to adjust the pitch on the
Alarm and the HUBB.
In
‘Advanced Menu’
go
‘Nightlight
Config’.
Find the first option titled
‘Nightlight Brightness’
and adjust
to manual setting.
Go to option
‘Nightlight Brightness’
and adjust as desired.
Go to option
‘Nightlight Colour’
and adjust as desired.
Colours available:
Red - Green - Blue - Yellow and Off.
Go to
‘Nightlight to Port’
. When this option is turned on the
Nightlight colour is copied to any connected Wolf hanger or
swinger.
DEVICE STATUS
MUTE
Use the back button to leave
‘Advanced Menu’
and navigate
to the option titled
‘Device Status’
and enter sub menu using
OK button.
ANTI-THEFT
When turning off the connected Alarm, a tone is played on
the Alarm and HUBB for theft prevention.
RANGE TEST
Navigate to the option
‘Range
Test’
and use the OK button to
begin the test. When a connection
is established the HUBB will
report the signal strength of
the connected Alarm and also
indicates that the LED is working.
BATTERY LEVEL INDICATION
Navigate to the option
‘Battery
Level’
. This provides a detailed
measurement of the Alarms
battery level.
Pressing the Mute button once should mute all connected
Alarms. On activation neither the HUBB or Alarm will play a
tone. A double press of the Mute button will undo the mute
on the HUBB and Alarms.
< Volume >
5 0 %
< Alert Tone >
2 8 %
< Nightlight Con >
[Enter]
< Battery Level >
9 7 %
< Range Test >
[Start]
