wolfappliance.com
|
7
POWER LEVEL INDICATOR
When an element is activated, a power level indicator
illuminates above the corresponding control indicating the
level of heat. The lowest heat is represented by the small
flame, varying levels of heat by additional indicators (dots),
and the highest heat by all indicators including the large
flame. Refer to the chart below.
SETTING
POWER LEVEL
USES
Melt
1 (small flame)
indicator
Melting butter, holding
chocolate, and sauces.
Simmer
2–6 indicators
Simmering sauces and
steaming rice.
Medium
6–7 indicators
Making French toast and
pancakes, heating milk,
cream sauces, soups, and
gravies.
Medium
High
7-8 indicators
Sauteing, browning, and
frying.
High
8–10 (large flame)
indicators
Boiling water, searing meat,
and canning.
Cooktop Operation
CONTROL PANEL INDICATORS
CONTROL
TOUCH PAD
INDICATOR
Control Panel Lock
Element(s) On
All Elements Off
Hot Surface
On/Off
Timer Set
Melt
Simmer
High
Boost Mode
Front-to-Back Bridge
Side-to-Side Bridge
All Bridge
COOKTOP OPERATION
SINGLE ELEMENT AND INNER ZONE
Setting Controls:
1
To activate a heating element, touch
for the desired
single element on the control panel. The power level indi-
cator will flash and all indicators for that zone will flash.
2
To complete the activation, touch
for highest heat,
for lowest heat,
to activate boost mode, or
touch the desired power level indicator.
3
To change the heat setting while the element is on, touch
or slide to the desired power level.
4
To turn the element off, touch
.
IMPORTANT NOTE:
If no cookware or an incompatible pan is
placed on an induction element after activation, the con-
trol will flash for 30 seconds, then the element will turn off
automatically.
BOOST MODE
Boost mode boosts power on one element by diverting
power from an adjacent element. If the adjacent element is
on high, the power output will be reduced. The reduction
in power is displayed on the power level indicator of the
adjacent element.
illuminates when an element is in
boost mode.
Boost mode deactivates automatically after approximately
15 minutes of continuous operation and can be reactivated
if desired.
CONTROL PANEL LOCK
The control panel lock feature prevents unwanted cooktop
operation. Touch and hold for three seconds to lock
and unlock the control panel. illuminates when the con-
trol panel is locked.
The control panel automatically locks after 10 minutes
of inactivity. This automatic lock feature can be disabled
through the extended options menu. Refer to page 8.
When the cooktop is powered up for the first time and after
a power outage, the cooktop will default to lock mode.
Содержание ICBCI152
