11
I N S TA L L AT I O N
I N S T R U C T I O N S
E L E C T R I C A L
R E Q U I R E M E N T S
ELECTRICAL SHOCK HAZARD —
R E C O M M E N D E D G R O U N D M E T H O D
W I R I N G D I A G R A M
A wiring diagram covering the control circuit
for each Wolf gas cooktop model can be found
on page 15.
IMPORTANT NOTE:
If codes permit and a
separate ground wire is used, it is recom-
mended that a qualified electrician determine
that the ground path is adequate.
IMPORTANT NOTE:
Check with a qualified
electrician if you are not sure whether the
cooktop is properly grounded.
IMPORTANT NOTE:
Do not ground to a gas
pipe.
A 240 V AC, 10 Amp, fused electrical supply is
required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a
separate circuit serving only this appliance be
provided.
Electronic ignition systems operate within
wide voltage limits, but proper ground and
polarity are necessary. In addition to checking
that the outlet provides 240 V AC power and is
correctly grounded, the outlet must be checked
by a qualified electrician to see if it is wired
with correct polarity. A wiring diagram is
This appliance, when installed, must be electri-
cally grounded in accordance with local codes.
COOKTOPS installation manual:Intl Gas Cooktops Install 31/3/10 2:24 PM Page 11
The appliance is supplied with a cord and
appliance can be hard wired to a terminal box or
plug. Do not remove ground prong. Supply must
be properly earthed, failure to follow these
instructions can result in electric shock, fire or death
female plug to connect to the appliance. The
WIRING CONNECTIONS
Active - Brown or Red
Neutral - Blue or Black
Earth Green and Yellow
be fitted with an approved 10 amp 3 pin insulated
provided in the literature package.
The internal
Neutral - White
Earth - Green
wiring of the appliance
i
s
;; Active - Black
T
o
minimize possible shock hazard, the cord must
be
hard wired or an approved 3 pin insulated plug
f
itted and plugged into a mating 3-prong ground-type
outlet, grounded in conformance with all local
codes and ordinances. If a mating outlet is not
available, it is the obligation of the customer to
have a properly grounded, 3-prong outlet
o
r
hard
wired by a qualified electrician.
product operation.
power supply may occur, resulting in loss of
a GFCI protected outlet, nuisance tripping of
IMPORTANT NOTE:
If product is connected to
this cooktop must be grounded.
IMPORTANT NOTE:
For your personal safety,
