Wolf CWL-300 B, Руководство по установке

Страница: 9 / 20

Heat Recovery unit CWL-300(B) / CWL-400(B) with option PCB 9
The installer can modify more settings. When parameters are
set incorrectly, the appliance can no longer perform up to stan-
GDUGVRPDNHVXUHQRSDUDPHWHUVDUHPRGL¿HGLQFRUUHFWO\$OVR
refer to the menu structure diagram § 6.5.1 in the installation
instructions CWL-300/400. The following actions are required
to modify the settings from operational mode.
(By way of example parameter I8 is changed from 1 to 2.)
1. Press key “ F ” during 3 seconds
WRDFWLYDWHWKHVHWWLQJVPHQX
2. Press key “ F ” and “ OK ” for 3 se-
FRQGVWRDFWLYDWHWKHFRPSUHKHQ -
VLYHLQVWDOOHUSDUDPHWHUVVHW
3 The desired parameter can be
found with the aid of keys “
+ ” and
“ - ”.
4. Pressing key “ OK ” calls up this
setting.
5 Use keys “ + ” and “ - ” to modify
WKHYDOXH
7KHPRGL¿HGVHWWLQJFDQQRZEH
A saved and stored
B be removed
C restored to factory setting
A
Simultaneously press keys “ F ”
and “ +
´¿UVW³
F ” and then “ + ” )
WRVDYHWKHPRGL¿HGVHWWLQJWKH
PRGL¿HGYDOXHZLOOQRZEOLQN[
DV FRQ¿UPDWLRQ WKH YDOXH UH
-
mains on the display. Press key
“
OK ” to return to the settings
menu; if desired, more settings
can now be changed.
(see item 2 to 5)
Continue with step 7.
B
Press key “ OK ” to go back
to the settings menu without
VDYLQJWKHPRGL¿HGVHWWLQJWKH
SUHYLRXVVHWWLQJZLOOEHPDLQWDL
-
ned. Continue with step 7.
C
Simultaneously press keys “ F ”
and “ - ´¿UVWSUHVV³ F ” and then
“ - “ ) to go back to the factory
setting. The factory setting will
blink 3 times and remain at that
YDOXH7KHPRGL¿HGVHWWLQJKDV
QRZEHHQUHPRYHG3UHVVNH\
“ OK ” to return to the settings
menu. Continue with step 7.
7 Press key “ F ” for 1 second to lea-
YHWKHVHWWLQJVPHQX
Settings Chapter 4
5423-0
>3s
>3s
4.2.2 Modifying settings by the installer