Cooktop Low-Profile Hood Installation
10
Wall Hoods—Ducted Installation
Locate the electrical supply through the wall within the
shaded area shown in the illustration on page 6. Install
ductwork as outlined on pages 8–9.
Mount the bottom panel to the hood. Attach with the four
screws provided on the hinge side of the panel.
IMPORTANT NOTE:
If a backsplash is to be used, it should
be installed prior to mounting the wall hood. Secure the
hood mounting brackets to the wall studs prior to
installing the backsplash. Refer to installation instructions
provided with the backsplash.
MOUNT HOOD TO WALL
IMPORTANT NOTE:
Wolf recommends that the bottom
of the ventilation hood be installed 24"
(610)
to 30"
(762)
above the countertop.
Draw a vertical line on the wall indicating the centerline of
the hood. Mark the first two holes to be drilled in the wall.
Position according to dimensions shown in illus 1 below.
Drill two
5
/
16
" diameter holes and fit the screw anchors
provided. Attach the metal bracket to the wall using the
screws provided. Use the two cut-out triangles on the
bracket to position it exactly along the vertical axis of the
hood.
Hang the hood on the bracket as shown in illus 2. Adjust
the horizontal position moving the hood to the right or left
so that it is properly aligned. When adjustment has been
completed, without removing the hood, mark the four
additional holes to be drilled in the wall. Remove the hood
and drill four
5
/
16
" diameter holes and fit the screw
anchors provided. Mount the hood to the wall using the
screws provided.
Mount the plate of the electrical system fixing it with three
screws as shown in illus 3 below.
ATTACH TELESCOPIC FLUE
Assemble the three support brackets for the telescopic
flue as shown in illus 4. The width of the bracket assembly
can be adjusted. With screws and anchors provided,
attach the bracket assembly to the ceiling so that it is
positioned along the axis with the hood.
Illus 3.
Illus 4.
SCREWS
ANCHORS
BRACKET
CENTER
OF HOOD
5
1/16
"
(129)
13
3/8
"
(340)
Illus 1.
Illus 2.
