22
3062815_0110
13. Roof integration, interlocking tile
Rafter
Clamp (3 pce.
per side panel)
Timber spacer
Height = batten
Clamp (2 pce. per top panel)
Top panel
Side panel
Batten
Hook in side panel
Installation of the cover frame panels
Triangular sealing tape
at the top and side
Edge protector
Triangular sealing tape
Triangular sealing tape
at the top
Batten
Woodscrew
4x60
Woodscrew
4x30
Affix the triangular sealing tape
Woodscrew
4x30
1. Hook in the casing panels on the left and right in accordance with the diagram
and secure them with clamps.
2. Push the top casing panels over the collector frame. As support on each
rafter, a timber spacer of batten height must be fitted below the casing panel.
Secure the casing panel with clamps.
3. Push the protective edge profiles at the casing panel joint at the top over
the return, see the diagram.
4. Affix the side and top triangle sealing tape to the casing panels.
5. Position the tiles around the cover frame; if necessary use half tiles or trim
tiles to size.
approx.
5 cm
(0.5-12 cm)
