wolfappliance.com
|
11
BOOST MODE (INDUCTION)
For induction cooktops, boost mode boosts power on one
element by diverting power from an adjacent element. If
the adjacent element is on high, the power output will be
reduced. The reduction in power will be displayed on the
power level indicator of the adjacent element. Refer to the
illustration below.
will illuminate when an element is in
boost mode.
Boost mode will deactivate automatically after approxi-
mately 15 minutes of continuous operation and can be
reactivated if desired.
Cooktop Operation
SINGLE ELEMENT AND INNER ZONE
Setting controls:
1
To activate a heating element, touch ON/OFF for the
desired single element on the control panel. Power level
indicator will flash and all indicators for that zone will
flash. Refer to the illustration below.
2
To complete the activation, touch HI for highest heat,
SIM (MLT) for lowest heat, BOOST (induction) to activate
boost mode, or touch desired power level indicator.
3
To change heat setting while the element is on, touch or
slide to desired power level.
4
To turn element off, touch ON/OFF.
IMPORTANT NOTE:
For induction cooktops only, if no
cookware or an incompatible pan is placed on an induction
element after activation, the control will flash for 30 sec-
onds, then the element will turn off automatically.
COOKTOP OPERATION
Element activation
ON/OFF
Boost mode
BOOST