8
W O L F
G A S C O O K T O P S
I N S TA L L AT I O N
S P E C I F I C A T I O N S
The illustrations below provide the overall
dimensions, countertop cut-out and installation
specifications for Model ICBCT36G/S.
IMPORTANT NOTE:
991 mm wide cabinets are
recommended for installation of Model
ICBCT36G/S.
A Wolf 914 mm built-in oven may be installed
below Model ICBCT36G/S. For this installation,
unless you are using cabinets deeper than
610 mm, it is recommended that the electrical
and gas supply be placed in the base cabinet to
the right of the oven. Refer to installation
instructions provided with the built-in oven for
additional specifications.
If the Model ICBCT36G/S is installed above
cabinets, the gas and electrical placement is not
critical. A grounded outlet needs to be placed
within 1.2 m of the right rear of the cooktop.
When a 914 mm built-in oven is installed below
Model ICBCT36G/S, it is recommended that the
rough opening for the oven be 197 mm from
the floor to ease the use of the oven door.
IMPORTANT NOTE:
When multiple cooktop
units are installed side by side, refer to the
countertop cut-out dimensions on page 9.
229 mm*
min
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
457 mm
489 mm
COOKTOP CUT-OUT
DEPTH
914 mm
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
330 mm
max
762 mm
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
610 mm
min
*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 457 mm above countertop.
**Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 457 mm above countertop.
889 mm
COOKTOP CUT-OUT WIDTH
889 mm
COOKTOP CUT-OUT WIDTH
991 mm
RECOMMENDED CABINET WIDTH
914 mm
min
102 mm
254
mm
89 mm
E G
914 mm OVEN OPENING
95 mm
min
64 mm
min
FRONT OF COUNTERTOP
489 mm
COOKTOP
CUT-OUT DEPTH
64**
mm
64 mm
min
Overall Dimensions
Countertop Cut-Out
533 mm
OVERALL
DEPTH
914 mm
OVERALL WIDTH
102 mm
M O D E L I C B C T 3 6 G / S
D I M E N S I O N S
Overall Width
914 mm
Overall Height
102 mm
Overall Depth
533 mm
Recommended
Cabinet Width
991 mm
Minimum Cabinet Depth
578 mm
Minimum Height Clearance 102 mm
Cut-Out Width
889 mm
Cut-Out Depth
489 mm
Unit dimensions may vary to ±3 mm.
I N S T A L L A T I O N S P E C I F I C A T I O N S – M O D E L I C B C T 3 6 G / S
Note A:
Side clearances. If the distance
measured from the periphery of the
nearest burner to any vertical surface
is less than 200 mm, the surface shall
be protected in accordance with
clauses 5.12.1.1. & 5.12.1.2 of AS5601.
Note B:
The rangehood fitted above the
cooktop must be installed according to
the installation instructions for the
rangehood. A minimum distance of
750 mm is required for a range hood
and 750 mm for an exhaust fan
.
Note A
Note B
102 mm
533 mm
OVERALL
DEPTH
762 mm
OVERALL WIDTH
COOKTOPS installation manual:Intl Gas Cooktops Install 31/3/10 2:24 PM Page 8
