Intended use
16
EN
General safety information
-
Before initial use, perform a visual inspection
of the device to check for damage.
Prior to
use any damage must be repaired by a qualified
expert or workshop.
-
Do not charge any damaged, defective or
deformed power packs.
-
Do not charge any third party power packs.
-
Never try to charge non-rechargeable
batteries.
-
Do not cover the ventilation slits of the
charger.
Otherwise the charger may overheat and
no longer function correctly.
-
Do not charge power packs whose
temperature is less than 10°C or greater than
40°C.
-
Repairs must only be performed by a qualified
expert or workshop.
Safety information
Intended use
The device is intended for charging power
packs authorised by the manufacturer.
The authorised power packs and the
authorised operating arms with a perma
-
nently installed battery pack unit are indi
-
cated in the CE declaration of conformity
(enclosed). Any other use is classed as
an unintended use. The user is liable for
any damage arising from unintended use.
Identification plate
Position
The identification plate is located at the
charger casing.
Note
The identification is considered
as a document. It must never be
altered or obliterated.
Содержание QC 25 eM
Страница 1: ...Ladegerät Charger Chargeur QC 25 eM ...
Страница 2: ......
Страница 3: ...A 1 2 3 XXXXXXXXXXX 72XXXXXX650 1 2 3 4 5 6 7 8 9 10 11 12 14 XXXX 13 xxxx ...
Страница 4: ......