Wolf Garten Compact plus 34 AC, Инструкция по эксплуатации

Страница: 15 / 38

16
G
Emptying of Grassbox
When the collection bag is full, the flap lowers by itself.
1
Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
z
Switch the motor off and pull the plug bracket out.
z
Empty collection bag.
z
Remove potential blockages in the cutting space before
starting.
3
Instructions for level indicator:
For an efficient functioning of the level indicator, regularly
clean the holes under the level indicator in the collection
bag with a hand brush.
Mulch
„Mulching“ is a process in which the grass is finely chopped by a
special cutting system and then deposited on the ground. The re-
sult is that the grass does not have to be collected and disposed
of. „Mulching“ also prevents the lawn from drying out.
3
Instructions for mulching
We recommend:
z
Depending on the growth of grass, mulch 1 – 2 x per
week
z
The grass should not be too high nor too wet!
z
Go slow while mulching
z
Take care that the blade channels do overlap.
z
Do not cut grass more than 20 mm.
3
Note:
Mulching is not advisable in case of moss-affected or
entangled grass, because the cut material stays on the
moss surface and/or entanglement and thus cannot be
absorbed by the ground.
z
Regularly scarify and manure the lawn.
Activating the mulch function
1
Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
z
Do not start the motor until your feet are at a safe dis-
tance from the cutting tool.
1. Remove the grass collecting bag.
2. Set the switch to „MULCH“.
3. Start the motor.
Maintenance
General
1
Attention! Rotary cutter blade
Before all maintenance and cleaning work:
z
Pull the plug bracket out.
z
Do not touch running blades.
Cleaning
z
Clean mower thoroughly after each mowing with cloth or
brush.
z Clean the mulch flap at regular intervals with a small
broom
.
z
Do not spray with water.
Winter Storage
z
Clean mower thoroughly before storing away.
z
Have your mower thoroughly checked once a year by an ap-
proved Service Centre.
z
Do not store it in a wet or humid place.
Changing blades
z
Caution! - Sharp cutting blades - pull the plug bracket out
before performing any maintenance work.
1
Attention!
An unbalance can develop after regrinding of the blade.
z
Always regrind the blades in a specialist workshop,
because an unbalance check should be undertaken
according to the safety regulations.
z
Always change blades in a specialist workshop. A torque
spanner of 10 mm is mandatorily required.
Fastening torque of the screws: 6 - 7 N-m
.
Spare parts
S
Q
T
U
U
Item number Order description Product information
4904 031 Grass catcher
4908 096 Vi 34 X Replacement blade 34 cm
4908 074 Charger