Wolf Garten 1.34 XC, Инструкция по эксплуатации

Страница: 14 / 36

14
G
Connecting to the mains (230 Volts, A.C., 50 Hz)
z
The mower operates from any normal household mains supp-
ly, provided with a 16 Amps. fuse.
3
Note: Residual current protection device
These protection devices safeguard while touching
damaged wires, from insulation flaws and in certain cases,
also while damaging live wires.
z
We recommend that the equipment only be plugged into
a power socket, which is protected by a residual current
protection device (RCD) with a residual current of not
more than 30 mA.
z
Retrofit kits are available for old installations. Consult an
electrician.
Starting and Stoping
z
Switch on motor with mowerplaced on level and firm ground.
z
not in high grass - alternatively tilt slightly .
Switch-on motor
1. Depress button and hold (1).
2. Lift up bar (2).
3. Release bar (2).
Switch-off motor
z
Release bar (2).
Emptying of Grassbox
The grassbox is full and should be emptied as soon as grass clip-
pings remain uncollected on the ground behind your mower.
1
Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
z
Empty collection bag .
z
Remove potential blockages in the cutting space before
starting.
Tips for mowing
z
To prevent strips of grass from being left unmowed, the cutting
paths must always overlap a few centimeters
.
z
Always let cable trail on the cut side of the lawn.
Maintenance
General
1
Attention! Rotary cutter blade
Before all maintenance and cleaning work:
z
pull out the power plug.
z
Do not touch running blades.
Cleaning
z
Clean mower thoroughly after each mowing with cloth or
brush.
z
Do not spray with water.
Winter Storage
z
Clean mower thoroughly before storing away.
z
Have your mower thoroughly checked once a year by an ap-
proved Service Centre.
z
Do not store it in a wet or humid place.
Changing blades
z
For all works on blades, coupling and cutter bars, first of all,
pull out the power plug and wear protective gloves.
1
Attention!
An unbalance can develop after regrinding of the blade.
z
Always regrind the blades in a specialist workshop,
because an unbalance check should be undertaken
according to the safety regulations.
z
Always change blades in a specialist workshop. A torque
spanner of 10 mm is mandatorily required. Fastening torque
of the screws: 6-7 N-m
(37).
z
Always change blades in a specialist workshop. A torque
spanner of 13 mm is mandatorily required. Fastening torque
of the screws: 16-18 N-m
(40).
Spare parts
N
O
O
P
Q
R
R
R
Item number Order description Product information
4909 031 Grass catcher (34)
4917 031 Grass catcher (37)
4968 030 Grass catcher (40)
4904 096 Vi 34 FM Replacement blade 34 cm
4907 096 Vi 37 FM Replacement blade 37 cm
4970 096 Vi 40 FM Replacement blade 40 cm