Before
the inspection
28
6
Before the inspec-
tion
6.1
Connecting the Probe
•
Loosen the union nut of the probe connection
and remove the probe (see fig. 1 part 3)
•
To assemble the probe again, proceed as
follows:
Figure 3: Probe Connection
ATTENTION!
The probe connection has a small notch. Take
care to plug the notch on the small nose piece of
the plug connector.
•
After that tighten the union nut.
6.2
Switch on and off
•
To switch on/off the Wöhler VE 320, briefly
press and hold the ON/OFF button.
NOTE!
Make sure that the probe is connected correctly.
Otherwise a "noise" will appear in the image.
NOTE!
A "noise" in the image may also indicate that the
battery needs to be charged.
