Wohler iAM-MIX-16, Руководство пользователя

Страница: 39 / 108

Page
39
How do I ensure that outputs get automatically muted when a
headphone is inserted into the headphone jack?
In Output Routing configuration, if the Mute on Headphone Insertion selection in
the Output Options is ON (checked), then the outputs get automatically muted
when a headphone jack is inserted into the headphone jack. In Figure 4-16, AES
Pair 1 will be muted when a headphone is inserted, but the Analog XLR outputs will
not.
Figure 4-16 - Headphone Insertion Muting Effect on Output Routing
Why are AES Pairs 1, 2, 3, and 4 in the Output Routing Matrix?
If channels are to be monitored using a multichannel external sound system, then
the multiple AES Outputs can be used to output 6 or 8 channels to it. Using the
output routing matrix, check the channels to be monitored on each of the AES
Outputs. This will route the audio channels to the AES Outputs on the rear panel.
What are AoIP-Pair 30 and AoIP Pair 31?
Figure 4-14 shows the AoIP Output channels in the Output Matrix. They perform the
following functions:
AoIP-Pair 30 : Selected inputs will be mixed to AoIP transmit channels 59 and 60.
Note that configuration for channels 1 - 58 is not supported. Use a Dante Controller
or Coveloz web interface to route these channels appropriately.
AoIP-Pair 31 : Selected inputs will be mixed to Channel 61 and Channel 62. Again,
use a Dante Controller or Coveloz web interface to route the remaining pairs
appropriately.