Wohler iAM-MIX-16-DA Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 54

Wohler iAM-MIX-16-DA Скачать руководство пользователя страница 7

Page

7

Heat Dissipation

The ambient temperature inside the mounting enclosure should not exceed
40° Celsius (104° Fahrenheit). Adjacent devices can be rack mounted (or
stacked) in proximity to the unit if this temperature is not exceeded.
Otherwise, allow a 1RU (1.75”/44.45mm) space above and below the unit
for air circulation.

Sympathetic Vibration

Sympathetic vibration from other equipment (cables, etc.) in the rack may
be serious enough to interfere with the unit’s sound quality. If you experience
sympathetic vibrations, use thin card stock, felt, foam, or weather-stripping
between the vibrating surfaces. Tie loose cables securely with cable ties.

Mechanical Bracing

The 1RU chassis is securely attached to the front panel. In addition, the
chassis has mounting tabs through which you attach it to the rack rail. This
feature will reduce or eliminate rear bracing requirements in many
mobile/portable applications. The weight of internal components is
distributed fairly evenly around the unit.

Electrical Interference

Be careful to avoid mismatched cable types and other similar causes of
undesired reflections in digital signal systems. If severe enough, such
reflections can result in corruption of the digital data stream. As with any
audio equipment, maximum immunity from electrical interference requires
the use of shielded cable; however, satisfactory results can sometimes be
obtained without it. The internal circuitry ground is connected to the chassis.

Power

The unit comes with a standard 18 VDC / 3.9 A external power supply that
connects to an AC mains power source (100 to 240 VAC, 1.5A, 50/60Hz)
using an IEC power cord.
When the mains plug or appliance coupler is used as the disconnect device,
the disconnect device should remain operable.

Important

Heat generated by the class D power amplifiers, power supplies,
and other components is vented by slots in the sides and back of
the unit. Therefore, as a safety precaution, you must allow proper

ventilation on these surfaces.

«
...
5
6
7
8
9
...
»

Содержание iAM-MIX-16-DA























































Отзывы:

Нет отзывов