Page
30
Network Setup
Make network
IP Address
changes for the local iAM-MIX unit’s
Management (MGMT) Port
here.
Figure
4–10:
Set
IP
Addresses
The procedure for changing the IP Address information is as follows:
1.
Use DHCP?
Check this box if your network has a DHCP server and
you want to use dynamic addressing. Otherwise, you must enter static
IP address entries in the four fields which follow.
2.
IP Address
:
Enter the network address. Leading zeroes are not
required.
3.
IP Mask
: This should usually be 255.255.255.0 unless your network
can work across multiple subnets.
4.
Gateway Address
: This should usually be the same domain and
subnet address numbers as the IP Address, but with the last octet
being .1.
5.
DNS-nameserver
: A default value is shown for reference only. DNS is
not normally required for basic static IP network configurations to
work. Your IT administrator will specify a value to work with mixed
static/dynamic network setups.
6.
Save
: When you have made all of the necessary entries, press
Save
to apply the changes internally before rebooting the unit.
Содержание iAM-MIX-16-DA
Страница 19: ...Page 19 Figure 3 1 iAM MIX Block Diagram ...