Page 71
Home Page
You can navigate to different pages within the Bach Controller GUI to review or
perform various functions.
The
Home
page can be accessed by entering the 172.27.2.30 IP address. It gives
a device overview and stream status.
Figure C–1: BACH Controller Home Page
Configuration/Device Management
The
Configuration
page allows operations such as modifying the IP address,
Packet time, Rebooting and so forth.
The first step in setting up the Ravenna option is to configure the Ethernet IP
address and other settings. The
Device Configuration
page allows operations
such as modifying the IP address, Packet time, Rebooting etc.
Note:
There are important considerations when setting up a Ravenna network.
Ideally, the Ravenna network must be completely isolated from other Ethernet
devices, such as computers, printers, and connections to the internet. This is
because the timing of the communications on the Ravenna network is very critical.
It should have its own 1Gbps router. However, at least one computer must be
connected to the Ravenna network to perform configuration.
Set the Ethernet IP address of the Ravenna option into the "eth1" line on the
Device Configuration
page. The address must be on the same subnet as the
other devices on the Ravenna network.
Note:
The "eth0" setting is not to be used. Leave it at its default setting.
