Page 16
To integrate it into your digital network, you need to set its address to the source to
be monitored. You must use the emSET configuration software to set up this option.
It is available from Wohler Technologies Technical Service. The procedure to
accomplish this is described in the
SFP-2022-6 / SFP-2110 Setup Guide
(part
number 821822), which is available at
https://www.wohler.com/wp-
content/uploads/2016/09/SFP-2022-6-SFP-2110-Setup-Guide-821822A.pdf
Channel Meters and Touch Operations
The audio mixer terminology of “solo” is used in this manual when referring to
muting all but a specific audio channel or subgroup. Since the terms “group” and
“subgroup” have different meanings in SDI vs. pro audio, this manual uses the term
“cluster” to define a set of audio channels forming an audio program—such as Mono
(1.0), Stereo (2.0) or Surround (5.1 or 7.1).
Audio meters are displayed on touchscreen LCD display(s) in labeled clusters, as
shown in Figure 2-6. The clusters of channels and other options relating to this are
defined using the iAM-AUDIO Web GUI software as described in Chapter 4.
Figure 2-6: Audio Level Meter Screen
-00
-60
-40
-30
-20
-20
-30
-40
-60
-00
10
9
S
t
e
r
e
o
A
S
t
r
e
r
e
o
B
S
t
u
d
i
o
7
S
t
u
d
i
o
2
5 6
3
4
1 2
14
13
16
15
12
11
Channel / Cluster Touch Selection Area
Channel Identifiers
8
7
1.
Channel Identifiers
: Above the level meters are the Channel Identifiers.
They indicate the following:
Important:
The numbers above each meter bar graph position only indicate its
relative position on the display, and not any particular channel number.
Meter numbers only serve as references for monitor configurations at
the Web GUI level. Different presets typically have different input
channels assigned to various meters.
