Operation
11
Fig. 9: Initial screen
After the meter has been switched on, a self test
ist carried out for 5 seconds.
During the self test the user has the possibility to
enter the customer menu or the diagnosis menu.
The diagnosis menu shows information about the
firmware, the version of the measurement module,
the serial number of the meter, the calibration
date, the production date and the identification
number of the meter (MIN).
For information about the customer menu, see
chapter 9.2.
After the self test , the measurement screen ap-
pears. If the Moisture Scale FW 550 is not con-
nected, the measurement mode
“firewood logs”
will appear automatically on the screen. If the
Moisture Scale FW 550 is connected, the meas-
urement screen “bulk material” will appear auto-
matically on the screen.
NOTE!
Only if the Moisture Scale FW 550 is connected to
the meter before the meter is switched on , the
measurement mode
“bulk material“ will appear on
screen.
For changing the measurement mode, go to
the main menu and select „Select probe”, see
chapter 8.6.
