Wohler AMP-S8 Series Скачать руководство пользователя страница 4

Страница: 4 / 42

AMP-S8

User Manual P/N

821640

Rev-

AMP-S8

MDA

Features

AMP-S8

SDA

Features

AMP-S8

HDA

Features

General AMP-S8 Features

Features

The

AMP-S8

audio monitoring products are a complete, exceptionally high quality

SD-SDI/HD-SDI, AES/EBU

and

Analog

stereo audio monitoring solution. The

AMP-S8

comprehensive monitoring features are available in either a

compact one (

1U AMP1

) or two (

2U AMP2

) rackspace cabinet. A significant feature is the ability to process and monitor up to

eight channels from an

SDI

and/or

SD-SDI

bitstream, two sets of four

AES/EBU

signal pairs (balanced and unbalanced), or

eight

Analog

channels. Eight high-resolution 53-segment tri-color LED bargraph audio level meters provide accurate and instanta-

neous visual level monitoring at a glance. A convenient high-contrast LCD display on the front panel shows the user settings and
status (as currently selected), type of signal, channel selection, mute status, and alternately, phase/correlation. Input presets may be
configured and easily recalled by the user.

Additionally, the unique design of the

AMP-S8

provides optimally focused sound in an Ultra Near Field (1 to 3 feet)

environment, which allows higher SPL for the operator while reducing overall ambient sound and adjacent bay crosstalk.

There are four different configurations which vary according to

SDI

input type and configuration; the

AMP-S8DA

(

SDI

), the

AMP-S8SDA

(270 Mbps

SDI

), the

AMP-S8HDA

(1.5 Gbps

HD-SDI

), and the

AMP-S8MDA

(270 Mbps

and

1.5 Gbps

HD-

SDI

• 1U or 2U Rack Spaces: highest fidelity in minimum size

• AES/EBU, and Analog signal monitoring

• Four de-embedded AES balanced or unbalanced outputs
(8 channels) from two selected SDI Groups

• Four AES/EBU balanced inputs and loop-throughs on a DB-

25 connector

• Eight Analog inputs on a balanced DB-25 connector

• Eight Analog outputs on a balanced DB-25 connector

• Comprehensive multi-channel to stereo downmix capability

• Unit configuration stored while unit is switched off

• Storage for ten preset monitoring settings for easy recall

• Phase (polarity) correlation display of selected channels

• LCD status display on front panel

• Volume and balance controls

• Eight high-resolution 53-segment tri-color LED bargraph

level meters with simultaneous PPM dot over VU bar

• Headphone output

• Composite NTSC or PAL outputs from SDI input option (for

SDI or HD-SDI models)

• Software is field upgradable

AMP-S8

Powered Analog/Digital Audio Monitor

• Two SDI inputs (either SD-SDI

HD-SDI) with reclocked

output of selected input

• Single SDI input option available for cost savings

• Demuxes any two SD-SDI

HD-SDI groups to AES/EBU

• Select sources from AC-3 carried on SD-SDI , HD-SDI, or
AES/EBU for metering/monitoring

• AES output from HD/SD-SDI input

• NTSC/PAL video encoder option available

Description

Section 1:

General Features and Specifications

• Two HD-SDI inputs with reclocked output of selected input

• Single HD-SDI input option available for cost savings

• Demuxes any two HD-SDI groups to AES/EBU and Analog

• Select sources from HD-SDI, AES/EBU, or Analog for
metering/monitoring

• AES output from HD-SDI input

• NTSC/PAL video encoder option available

• Two SDI inputs with reclocked output of selected input

• Single SDI input option available for cost savings

• Demuxes any two SDI groups to AES/EBU and Analog

• Select sources from SD-SDI, AES/EBU, or Analog for
metering/monitoring

• AES output from SD-SDI input

• NTSC/PAL video encoder option available

• Same as other models except no SDI input option

AMP-S8

Features

Содержание AMP-S8 Series






































Результаты поиска

Содержание AMP-S8 Series

Отзывы:

Бренды по названию

Популярные бренды

Wohler AMP-S8 Series, Руководство пользователя

Результаты поиска

Содержание AMP-S8 Series

Отзывы:

Бренды по названию

Популярные бренды